DTC C1119-09: Hydraulic Pressure - Component Failures: Action
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2015 Land Rover Range Rover, and 2014 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Check and top up the hydraulic fluid as required
- Check integrity of hydraulic system and rectify any leaks as required. Clear the DTCs and retest
- If the fault persists, install a new dynamic response valve block as required and clear adaptive data. Clear the DTCs and retest
- If the fault persists, check the operation of the front and rear actuators and install new actuator(s) as required. Clear the DTCs and retest
- If the fault persists, check the dynamic response hydraulic pump pressure/fluid flow. If faulty, install a new dynamic response hydraulic pump as required