DTC C1040-26: Front Axle Rod Pressure Sensor - Signal rate of change below threshold: Action
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2015 Land Rover Range Rover, and 2014 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Check dynamic response system hydraulic fluid levels. Rectify as required
- Check dynamic response system secondary circuit for leaks. Repair as required
- Refer to the appropriate system wiring diagram and check the dynamic response front actuator rod-side pressure sensor circuit for short circuit to another circuit. Repair circuit as required, clear the DTCs and retest
- Reset pressure sensor offset settings and clear adaptive data. Clear the DTCs and retest
- If the fault persists, install a new dynamic response valve block as required and reset adaptive data. Clear the DTCs and retest