DTC B1408-11: Driver Seatbelt Anchor Pretensioner Deployment Control - Circuit short to ground: Action
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2015 Land Rover Range Rover, and 2014 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Visually inspect the driver seatbelt anchor pretensioner AK2 connector, the locking plunger should be flush with the housing. If not, push the locking plunger in. Clear the DTCs and retest
- Refer to the appropriate system wiring diagrams and check the driver seatbelt anchor pretensioner circuit for short circuit to ground