LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Diagnostic Trouble Code Index DTC: Anti-Lock Brake System Control Module (Abs) -- Range Rover/L405) >> Diagnostic Trouble Code Index DTC: Anti-Lock Brake System Control Module (ABS) >> Description And Operation >> DTC C105C-68: ABS Dynomometer Test Mode Active - Event information >> Possible Causes

Possible Causes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2015 Land Rover Range Rover, and 2014 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • This DTC is for event information only and does not indicate a fault.
  • Dynomometer test mode is entered when the accelerator pedal, brake pedal and dynamic stability control switch are simultaneously pressed for more than 5 seconds when the vehicle is not moving and the steering is in the straight ahead position. The anti-lock brake system and dynamic stability control warning indicators are also illuminated
  • Dynomometer test mode is exited by briefly pressing the dynamic stability control switch or turning the steering wheel through more than 90° (when the ignition is set to on). The anti-lock brake system and dynamic stability control warning indicators will extinguish
scientia non olet · About LEMON Manuals