DTC C1A38-11: Rear Cross-Link Valve - Circuit short to ground: Action
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2015 Land Rover Range Rover, and 2014 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the appropriate system wiring diagram and check the rear cross-link valve circuit for short circuit to ground. Repair circuit as required, clear the DTCs and retest
- Refer to the appropriate system wiring diagram and check the rear cross-link valve solenoid for short circuit to ground. If valve fault exists, check and install a new rear valve block assembly as required. Clear the DTCs and retest