DTC C1032-64: Raise-Lower Switch - Signal plausibility failure: Action
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2015 Land Rover Range Rover, and 2014 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Check the operation of the suspension raise and lower switches. Clear the DTCs and retest
- Refer to the appropriate system wiring diagram and check the terrain response switchpack power and ground circuits for open circuit. Repair circuit as required, clear the DTCs and retest
- Using Jaguar Land Rover Approved Diagnostic Equipment, complete a CAN network integrity test. Refer to the appropriate system wiring diagram and check the CAN network between the terrain response switchpack and the suspension control module. Repair circuit as required, clear the DTCs and retest
- If the fault persists, install a new terrain response switchpack. Clear the DTCs and retest