DTC C102C-22: Right Rear Vertical Acceleration Sensor - Signal amplitude > maximum: Action
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2015 Land Rover Range Rover, and 2014 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- With vehicle parked on a level surface, read rear right vertical accelerometer voltage and check it lies in range 1.9 to 2.1 volts. If voltage values are outside this range, check rear right vertical acceleration sensor signal circuit for short circuit to another circuit, loose connections and repair as required
- If no wiring faults are present, check the sensor is correctly mounted and secure the sensor as required. Clear the DTCs and retest
- If the fault persists, install a new sensor. Clear the DTCs and retest