LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> 28 - Ignition System, PREGLOW System -- (95B) MACAN >> WM 288719 Removing And Installing Glow Control Unit >> Installing Glow Control Unit

Installing Glow Control Unit

  1. Insert glow control unit into the plenum panel E-box.
  2. Installation is performed in reverse order to removal.
  3. Tighten fastening screws securing cover to fuse box housing. → Tightening torque: 3.5 Nm (2.5 ftlb.) 
  4. Tighten fastening screws securing filler neck to the body. → Tightening torque: 7 Nm (5 ftlb.) 
scientia non olet · About LEMON Manuals