Removing Central Computer

NOTIFICATION 

Incorrect handling of optical waveguides 

• Risk of damage to optical waveguide 
  • Observe the requirements for working with and installing optical waveguides.

Information 

Always comply with the regulations for handling ESD-sensitive components!

• Always wear approved work clothes and shoes when carrying out assembly work. 
• Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation. 
• Do not touch electric pins and plug contacts. 

Information 

• Work on display and operator control unit on a clean surface. 

1. Unscrew the four fastening screws -1-  on the central computer.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

2. Remove central computer from display and operator control unit by pulling it to the rear.