Disassembling steering wheel
- Unscrew fastening screws -1-
on rear cover -2-
.
- Release control unit -1-
at position and pull it forward slightly.
- Remove rear cover -2-
.
- Unscrew fastening screws -1-
for the paddles -2-
.
- Release and disconnect electric plug connection -1-
for the paddles.
- Lift paddles -2-
up and off.
- Unclip rear trims at positions using a suitable thin tool (e.g. feeler gauge).
- Only for heated steering wheel:
Release electric plug connection -1-
from the rear trim at the 6 o'clock position -2-
and disconnect it.
- Unscrew fastening screws -1-
on the main trim.
- Lift main trim -1-
straight up.
- Release and disconnect electric plug connections -1-
and remove main trim -2-
.
- Unscrew fastening screws -1-
for the multi-functional switch -2-
and front trim -3-
.
- Remove multi-functional switch -2- with cables and front trim -3- .
- Disconnect connector -1-
from connector lugs.
- Unscrew fastening screws -1-
on the contact bridge -2-
and remove contact bridge.
- Release electric plug connection -1-
for wire harness -2-
from the control unit -3-
and disconnect it. On vehicles with heated steering wheel, the electric plug connection for the heated steering wheel must also be loosened at the control unit.
- Release wire harness -1-
at positions from the steering wheel skeleton -2-
and remove it.