Programming DME Control Unit/Fuse For Engine Compartment Blower (GROUP 2, NO. 27/08)
Reference number: GROUP 2, NO. 27/08
PROGRAMMING DME CONTROL UNIT/FUSE FOR ENGINE COMPARTMENT BLOWER
TECHNICAL SERVICE BULLETIN
| PORSCHE: | Coupe and Targa: 911 Carrera (997)/911 Carrera S (997); 911 Carrera 4 (997)/911 Carrera 4S (997); 911 Turbo (997)/911 GT3 (997)/911 GT3RS (997) - 2007 |
| GROUP: | 2 |
| PART IDENTIFIER: | ENU 2470 |
MODEL YEAR
2007
VEHICLE TYPE
Coupe and Targa:
911 Carrera (997)/911 Carrera S (997)
911 Carrera 4 (997)/911 Carrera 4S (997)
911 Turbo (997)/911 GT3 (997)/911 GT3RS (997) - 2007
CONCERNS
Fuse for engine-compartment blower (fuse Fl/relay compartment 6/relay carrier 2).
INFORMATION
Programming DME control unit using PIWIS Tester software version 20.000 (or higher).
If, on the vehicles described in the "Time period" section, the DME control unit is replaced or if the existing DME control unit is programmed, the following applies:
Information
Before programming the DME control unit, the previous 7.5 A fuse for the engine-compartment blower must be replaced with a 10 A fuse.
Reason:
With PIWIS Tester software version 20.000 (or higher), speed setting 1 of the engine-compartment blower is deactivated in the DME programming. This can result in a higher power consumption when switching on the engine-compartment blower and therefore requires a fuse with a higher current rating.
Information
When entering the programming data, replacement of the fuse will be pointed out to you via an appropriate information text in the PIWIS Tester (as of software version 22.000).
PRODUCTION PERIOD
4th December 2006 to 8th February 2007
USA Vehicle Ident. Nos.
| from... | to | . |
| WP0AA29927S710921 ... | WP0AA29947S711181 | Coupe/Coupe 4 |
| WP0AB29987S731172 ... | WP0AB29937S732066 | Coupe S/Coupe 4S |
| WP0BA29967S745207 ... | WP0BA29937S745262 | Targa 4 |
| WP0BB29907S755292 ... | WP0BB29967S755393 | Targa 4S |
| WP0AD29907S784541 ... | WP0AD29967S785208 | Turbo |
| WP0AC29987S792258 ... | WP0AC29997S792494 | GT3 |
ACTION REQUIRED
Insert 10 A fuse on relay carrier 2, relay compartment 6 (in area of rear seat assembly) in slot Fl.
WORK PROCEDURE
- Remove rear cover and relay carrier, → 979009 Removing and installing relay carrier.
- Replace previous 7.5 A fuse with 10 A fuse.
- Reinstall removed parts.
REFERENCES
→ 979009 Removing and installing relay carrier