LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2007 >> 911 Targa 4, Automatic >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> Other Variant >> Engine Control Systems >> Programming DME Control Unit/Fuse For Engine Compartment Blower (GROUP 2, NO. 27/08)

Programming DME Control Unit/Fuse For Engine Compartment Blower (GROUP 2, NO. 27/08)

WARNING: This page is about the 911 Carrera, 2D Convertible, which is a different variant/trim than selected.
Publication date: 2008-08-22
Reference number: GROUP 2, NO. 27/08

PROGRAMMING DME CONTROL UNIT/FUSE FOR ENGINE COMPARTMENT BLOWER

PROGRAMMING DME CONTROL UNIT/FUSE FOR ENGINE COMPARTMENT BLOWER

TECHNICAL SERVICE BULLETIN

Reference Number(s): GROUP 2, NO. 27/08, Date of Issue:  August 22, 2008
PORSCHE: Coupe and Targa: 911 Carrera (997)/911 Carrera S (997); 911 Carrera 4 (997)/911 Carrera 4S (997); 911 Turbo (997)/911 GT3 (997)/911 GT3RS (997) - 2007
GROUP: 2
PART IDENTIFIER: ENU 2470

MODEL YEAR

2007 

VEHICLE TYPE

Coupe and Targa: 

911 Carrera (997)/911 Carrera S (997) 

911 Carrera 4 (997)/911 Carrera 4S (997) 

911 Turbo (997)/911 GT3 (997)/911 GT3RS (997) - 2007 

CONCERNS

Fuse for engine-compartment blower (fuse Fl/relay compartment 6/relay carrier 2).

INFORMATION

Programming DME control unit  using PIWIS Tester software version 20.000  (or higher).

If, on the vehicles described in the "Time period" section, the DME control unit is replaced or if the existing DME control unit is programmed, the following applies:

Information 

Before programming the DME control unit, the previous 7.5 A fuse for the engine-compartment blower must be replaced with a 10 A fuse. 

Reason:

With PIWIS Tester software version 20.000 (or higher), speed setting 1 of the engine-compartment blower is deactivated in the DME programming. This can result in a higher power consumption when switching on the engine-compartment blower and therefore requires a fuse with a higher current rating.

Information 

When entering the programming data, replacement of the fuse will be pointed out to you via an appropriate information text in the PIWIS Tester (as of software version 22.000).

PRODUCTION PERIOD

4th December 2006 to 8th February 2007

USA Vehicle Ident. Nos.

PRODUCTION PERIOD

from... to .
WP0AA29927S710921 ... WP0AA29947S711181 Coupe/Coupe 4
WP0AB29987S731172 ... WP0AB29937S732066 Coupe S/Coupe 4S
WP0BA29967S745207 ... WP0BA29937S745262 Targa 4
WP0BB29907S755292 ... WP0BB29967S755393 Targa 4S
WP0AD29907S784541 ... WP0AD29967S785208 Turbo
WP0AC29987S792258 ... WP0AC29997S792494 GT3

ACTION REQUIRED

Insert 10 A fuse on relay carrier 2, relay compartment 6 (in area of rear seat assembly) in slot Fl.

WORK PROCEDURE

  1. Remove rear cover and relay carrier, → 979009 Removing and installing relay carrier. 
  2. Replace previous 7.5 A fuse with 10 A fuse.
  3. Reinstall removed parts.

REFERENCES

→ 979009 Removing and installing relay carrier