LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2006 >> Cayenne Base, Standard >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Box >> Transfer box >> Introduction >> Diagnosis/troubleshooting >> Fault status

Fault status

The following status types are possible:

This information should be saved using the Save key [F4] and printed out.

NOTE:

Visual inspection: During troubleshooting, please check first that the affected pins on the control module plug connection are neither damaged nor corroded. The wires and plugs of the affected components must also be checked for external damage and correct contacts. Repair damaged or corroded pins if possible, otherwise replace affected pins. Repair or replace damaged wires. 

NOTE:

Battery voltage: A battery voltage of between 11.4 and 14.5 V is required for troubleshooting. This must be checked and provided if necessary. Voltages to components or fuses (input side) must be guaranteed on the vehicle electrical system. 

scientia non olet · About LEMON Manuals