LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2006 >> Cayenne Base, Automatic >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Level Control >> 43 16 19 Removing and installing level control module - as of MY 2003 (All Models Except Cayenne S TIO Titan) >> Coding level control module >> Coding level control module

Coding level control module

NOTE:
  • During coding, it is essential to guarantee the power supply for the 
  • The  PIWIS Tester P 9718   instructions take precedence and in the event of a discrepancy these are the instructions that must be followed. Deviations may occur with later software versions. 
  • The procedure described here has been structured in general terms; different text or additions may appear in the  PIWIS tester P 9718  . 

    • PIWIS Tester P 9718 . It is essential to connect a battery charger with a current rating of at least 40 A to the vehicle battery.

1. Connect the PIWIS tester P 9718  to the vehicle and start it. Switch on the ignition. >> Continue.

2. Select vehicle type  using the cursor keys.

3. Using the >> key, move from the vehicle type to the list of control modules.

4. Select Level control  and press the >>.

5. Select Coding  and press the >>.

6. Select Select country  and code with the F8.

Select country 
Cayenne RoW
Cayenne Thailand

7. Read out fault memory and erase if required.

scientia non olet · About LEMON Manuals