OBD (II) - P0354 - P1096: P0445: Diagnosis/troubleshooting: Notes

The wiring for fuse FE11 and fuel tank ventilation connector is routed via the KE7 disconnection point, pin 1. 

If connector A is disconnected from the DME control module and the ignition is or was switched on, the 'DME Control Module TIMEOUT' fault is recorded in many control modules. 

If control module connector A was disconnected from the DME in the course of troubleshooting or if the voltage supply was interrupted elsewhere (battery, fuse), the throttle adjusting unit must be adapted!