LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2005 >> 911 GT2 >> Repair and Diagnosis >> Engine Performance >> System >> Fuel System, Electronic Injection - 911 Turbo (996) >> Removing and installing DME control module >> Notes

Removing and installing DME control module: Notes

Fig 1: Locating DME Control Module
G03093576Courtesy of PORSCHE OF NORTH AMERICA, INC.
NOTE:
  • If the DME control module is replaced, it must be programmed using the Porsche System Tester. Thus, the DME control module can be adapted to the vehicle, the national variant and the equipment. The DME control module is located behind the right rear seat.
  • If possible, before the DME control module is removed and replaced, a read-out of the vehicle data should be obtained from the Porsche System Tester.
  • Symbol for the TAB key = "->|"
  • Follow the instructions for the Porsche System Tester.