Fault status

The following status types are possible:

• present
• not present

  This information should be saved using the Save key [F8] and printed out.

  NOTE: Visual inspection: During troubleshooting, please check first that the affected pins on the control module plug connection are neither damaged nor corroded. The wires and plugs of the affected components must also be checked for external damage and correct contacts. Repair damaged or corroded pins if possible, otherwise replace affected pins. Repair or replace damaged wires.
  NOTE: Battery voltage: A battery voltage of between 11.4 and 14.5 V is required for troubleshooting. This must be checked and provided if necessary. Voltages as well as components or fuses (input side) must be guaranteed on the vehicle electrical system.