Diagnosis/troubleshooting G 0210
WARNING:
Danger of burns from hot ATF fluid!
Skin or clothing may burn following contact with hot ATF fluid!
- Always allow ATF fluid to cool before draining!
- Wear suitable protective clothing!
- Use a suitable collecting container!
DIAGNOSIS/TROUBLESHOOTING PROCEDURE
| Work instruction | Display OK | If not OK | |
|---|---|---|---|
| 1 | Replace 'transmission oil pressure switch 2' | If the fault is corrected by replacing the oil pressure switch: → End If the fault persists even after replacing the oil pressure switch and the diagnostic conditions under point '1' were met: Go to Step 2 If the fault persists even after replacing the oil pressure switch and the diagnostic conditions under point '2' were met: Go to Step 3 |
|
| 2 | Replace shift solenoid valve S1 | → End | |
| 3 | Replace hydraulic control unit (hydraulic valve for activating brake band 2 jams) | → End | |