Diagnosis/troubleshooting G 0210
NOTE:
- Before replacing the control module, the ground connections, power supply and plug connections on the control module must be checked.
- When replacing the Tiptronic control module, observe the coding of the control module.
- After the test drive, read out the fault memory with the Porsche System Tester II No. 9588 again. Additional causes of faults that could damage the Tiptronic control module should be detected and remedied.
DIAGNOSIS/TROUBLESHOOTING PROCEDURE
| Work instruction | Display OK | If not OK | |
|---|---|---|---|
| 1 | Replace Tiptronic control module | → End | |
| 1 | CHECKING INSTRUCTIONS/CAN DATA BUS . | → End | |