Navigation input signals

The following queries can be run using this menu item:

NOTE: Deactivate the 'automatic traffic announcement' before performing the diagnosis on the PCM2. If this is not done, the diagnosis will abort.

MENU ITEMS AND FUNCTION REFERENCE CHART

Menu item	Function
Count CD sectors.	Under this menu item you can check the backward direction signal for the navigation unit during troubleshooting. Connect and start the 9588 Porsche System Tester II and switch on the ignition. Select 'Cayenne' in the Vehicle type menu and confirm with the >> key. Select 'PCM2' in the control modules selection and confirm with the >> key Select 'Navigation' in the PCM2 function selection and confirm with the >> key. Select the Input signals menu item and confirm with the >> key. Select the "CD sector counter" menu item using the > key and confirm with the >> key. Read out values from the display field.
Signal, reverse gear-navigation unit	Under this menu item you can check the backward direction signal for the navigation unit during troubleshooting. Connect and start the 9588 Porsche System Tester II and switch on the ignition. Select 'Cayenne' in the Vehicle type menu and confirm with the >> key. Select 'PCM2' in the control modules selection and confirm with the >> key Select 'Navigation' in the PCM2 function selection and confirm with the >> key. Select the Input signals menu item and confirm with the >> key. Select the "Navigation unit backward direction signal" menu item using the > key and confirm with the >> key. Read out values from the display field.

Menu item

Function

Under this menu item you can check the backward direction signal for the navigation unit during troubleshooting.

Connect and start the 9588 Porsche System Tester II and switch on the ignition.
Select 'Cayenne' in the Vehicle type menu and confirm with the >> key.
Select 'PCM2' in the control modules selection and confirm with the >> key
Select 'Navigation' in the PCM2 function selection and confirm with the >> key.
Select the Input signals menu item and confirm with the >> key.
Select the "CD sector counter" menu item using the > key and confirm with the >> key.
Read out values from the display field.

Under this menu item you can check the backward direction signal for the navigation unit during troubleshooting.

Connect and start the 9588 Porsche System Tester II and switch on the ignition.
Select 'Cayenne' in the Vehicle type menu and confirm with the >> key.
Select 'PCM2' in the control modules selection and confirm with the >> key
Select 'Navigation' in the PCM2 function selection and confirm with the >> key.
Select the Input signals menu item and confirm with the >> key.
Select the "Navigation unit backward direction signal" menu item using the > key and confirm with the >> key.
Read out values from the display field.