Coding the operator control unit (PCM): Notes

NOTE:

You can get the codes for the PCM from IPAS or from your importer by specifying the Vehicle Identification Number (VIN).

During coding, it is essential to guarantee the power supply for the Porsche System Tester. In case of doubt, connect a charging unit to the vehicle battery.

Instructions for the Porsche System Tester have a higher priority than the points listed here and are to be followed where descriptions deviate. Deviations may occur with later software versions.

The procedure described here has been structured in general terms; different text or additions may appear in the Porsche System Tester.

1. Connect and start the Porsche System Tester and switch on the ignition

2. Select "Cayenne" in the Vehicle type menu and confirm with the →| key.

3. Select PCM2/CDR23 in the control units selection and confirm with the >> key.

4. Select PCM2 in the PCM2/CDR23 function selection and confirm with the >> key.

5. Select Coding in the PCM2 function selection and confirm with the >> key.

6. Select PCM2 code in the PCM2 coding and confirm with the >> key.

7. Take the PCM2 code from IPAS and enter it in the form. Code with the F8 key.