PIWIS Tester II 9818
NOTE:
If the engine oil is replaced during maintenance work, the service interval must be reset.
- Start the Tester and follow the instructions on the Tester
- Select Vehicle Type, press F12, and start the automatic control unit search.
- Select the menu Instrument Cluster, Maintenance/Repairs and press F12 to continue.
- Select the Reset Service Interval menu and press F12.
- Select the Model Year and press F12.
- Select the Unit and press F12.
- Select GT vehicle and press F12.
- Check that -> 5. -> 6. and -> 7. are selected and press F12
- The service interval is reset. Press F12 to exit.
- Quit the menu, shut down the PIWIS Tester and disconnect it from the vehicle.