Accelerator Pedal-Signal Implausible
Diagnosis conditions
- Ignition on (approx. 30 sec.)
- Battery positive voltage greater than 7 V
Possible fault cause
- Pedal sensor
Affected terminals
None
NOTE:
- The system operates in pedal sensor standby mode, i.e. the angle of the accelerator pedal is calculated from the residual position sensor signal.
- The maximum pedal value is limited to 30 %.
- The dynamic is limited.
- The fault code only appears together with P0121 or P0221.
- The pedal value is reset to zero by actuating the brake.