LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2001 >> Boxster Base, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Instruments, Fuel Gauge, Alarm System - Diagnosis >> Control unit function >> Total mileage >> Notes

Total mileage: Notes

IMPORTANT: Information in this section applies to 2001-2004 models.

It is possible to code the total mileage under this menu item after replacing the instrument cluster.

  1. the Porsche System Tester II 9588 and switch on the ignition.
  2. Select vehicle type Boxster (986) and the instrument cluster control module and press the key ">>"
  3. Select the menu item Transponder key  and press the key ">>"
  4. You are requested to enter the Vehicle Ident. No  .
  5. Enter the Vehicle Ident. No. or accept with the key ">>", check the entry and press key "F7".
  6. Observe the instructions of the Porsche System Tester II 9588, enter the total mileage with the tabulator keys, check and then press the "F8" key to code the entered total mileage.

    The total mileage can also be read out from the old instrument cluster under the menu item "Control unit replacement" and can be transferred into the new instrument cluster if the old replacement instrument is still functional and if it is possible to establish communication with the Porsche System Tester II 9588.

scientia non olet · About LEMON Manuals