Possible causes, elimination, notes
NOTE:
The function of the kick-down switch can be tested with the Porsche System Tester 2 (Input signals/Kick-down).
- Test function of the switch with the Tester.NOTE: As the accelerator pedal box must not be opened, the complete box must be replaced if the kick-down switch is defective.
- Check wire from control module connector pin 18 to the kick-down switch for short to ground.
Nominal value:
- Accelerator pedal in idle position (kick-down switch open) = ohm
- Accelerator pedal to the stop (kick-down) = 0 ... 5 ohm