Air Conditioner
- Safety regulations when handling refrigerant R 134a
- Assembly work on the air-conditioning system
- Notes
- Assembly work involving the refrigerant system
- General assembly sequence
- Removing refrigerant by suction and cleaning
- Cleaning the refrigerant
- Draining off old refrigerant oil
- Evacuating
- Topping up with new refrigerant oil
- Filling via the high-pressure side
- Refilling the air-conditioning system
- Distribution of the oil quantity in the refrigerant circuit
- Removing and installing pressure switch for the air-conditioning system
- Removing and installing the fluid tank
- Removing and installing the compressor
- Removing and installing the expansion valve
- Installing and removing the heating/air-conditioning unit
- Removing and installing the condenser
- Removing and installing the magnetic coupling
- Removing and installing drive motors of the heating/air-conditioning unit
- Removing and installing drive motors for fresh-air motor/recirculation valve
- Removing and installing outside temperature sensor
- Removing and installing interior temperature sensor
- Removing and installing footwell blower outlet sensor
- Removing and installing blower driver
- Removing and installing fan for condenser
- Removing and installing ballast resistor for fan motor