Repair Of Rear Wiring Harness: Notes

NOTE:

The combination wires for ABS and BVA (brake-pad wear indicator) are integrated in the wiring harness. In the event of damage, the integrated wires can be removed and replaced by repair wires. The disconnection point is plug connector X 2/2 for the passenger compartment/rear end (yellow) or connector points in the rear luggage compartment.
After repair, the following function tests must be performed:
ABS: Test with the Porsche System Tester 2.
BVA: The indicator light must go out with the engine running and the brake linings intact.
Plug connection X 2/2, -(arrow)- passenger compartment/rear end: Install preassembled contacts or join wires at connection points. See Fig 1 .

Fig 1: Locating Plug Connection
Courtesy of PORSCHE OF NORTH AMERICA, INC.