Tightening Torques
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - INSTALLING TRANSMISSION G86
| Location | Thread | Tightening torque [Nm] (ft.lb) | ||
|---|---|---|---|---|
| Diagonal brace to carrier side section and body | M10 | 65 Nm (48 ft.lb) | ||
| Rear cross member (V strut) to sheetmetal cross member and body | M10 | 65 Nm (48 ft.lb) | ||
| Stabilizer to carrier side section | M8 | 23 (17) | ||
| Stabilizer mount to stabilizer | M10 | 50 Nm (37 ft.lb) | ||
| Drive shaft on the transmission flange | M8 | 39 Nm (29 ft.lb) | ||
| Drive shaft on the transmission flange | M10 | 81 Nm (60 ft.lb) | ||
| Transmission support to transmission | M10 | 65 Nm (48 ft.lb) | ||
| Hydraulic mount to carrier side section | M8 | 33 Nm (24 ft.lb) | ||
| Clutch slave cylinder | M8 | 23 (17) | ||
| Gear-shift lever to interior shift rod(1) | M8 | 23 (17) | ||
|
||||