LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2000 >> Boxster Base, Automatic >> Repair and Diagnosis >> Collision >> Body Panels >> Lids, Flaps >> Removing and installing lid release motor >> Removing lid release motor

Removing lid release motor

  1. Unscrew both fastening nuts and take out the retaining strip.
    Fig 1: Unscrewing Both Fastening Nuts And Taking Out Retaining Strip
    G03129766Courtesy of PORSCHE OF NORTH AMERICA, INC.
  2. Disconnect the electrical plug connection.
    Fig 2: Disconnecting Electrical Plug Connection From Lid Release Motor
    G03129767Courtesy of PORSCHE OF NORTH AMERICA, INC.
  3. Unscrew the fastening screws and disengage the cable.
scientia non olet · About LEMON Manuals