LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2000 >> Boxster Base, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Removing and installing rear speed sensors >> Installation

Removing and installing rear speed sensors: Installation

  1. Coat speed sensor and the bore in the wheel carrier with Molykote Longterm 2.
    NOTE: There is no O-ring between speed sensor and wheel carrier. The speed sensors at front and rear axles are the same.
  2. Insert speed sensor into wheel carrier without using excessive force and tighten the hexagon socket head bolt to 10 Nm (7 ftlb.).
  3. If the speed sensor has been removed or replaced due to an ABS fault or Traction Control fault, or because of accident repairs, a functional check should be carried out with the Porsche System Tester 2 - via the Actual Values menu, Speed submenu.
scientia non olet · About LEMON Manuals