LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 1987 >> 924 Standard >> Repair and Diagnosis >> Steering >> Steering Column >> Overhaul >> Steering Column Assembly >> Reassembly

Steering Column Assembly: Reassembly

  1. Install ball bearing against circlip at steering column lower end, and seat bottom circlip against bearing. Circlip must seat in recessed groove.
  2. Place contact ring and upper bearing together on steering shaft. Using a pipe, drive bearing into place on shaft. Pipe should contact inner race only. To complete assembly, reverse disassembly procedure.
scientia non olet · About LEMON Manuals