LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 1983 >> 928 Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - BOSCH AFC >> Removal & Installation >> THERMO Time Switch

THERMO Time Switch

NOTE: Thermo time switch removal should be done only when engine is cold. Removal of switch requires having replacement ready for immediate installation or draining cooling system below level of switch.

Disconnect battery ground cable and drain cooling system as required. Disconnect or remove components as required to gain access to thermo time switch. Disconnect electrical connector from switch. Loosen and remove switch. To install, reverse removal procedure, using sealer on switch threads.

scientia non olet · About LEMON Manuals