LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 1977 >> 924 Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Exhaust Emissions System - Catalytic Converters >> Testing >> 912 E & 914

912 E & 914

  1. With engine at normal operating temperature, connect exhaust probe of exhaust gas analyzer to test connection in front of converter. On 2.0L engine, disconnect and plug air injection hose at air pump. Take CO% level reading. If not to specifications, adjust idle CO% level.
  2. Connect exhaust probe and reconnect air injection on 2.0L engine. Reading at tailpipe should be within specifications and lower than value in front of converter. If not, converter is defective and must be replaced.
CATALYTIC CONVERTER CO% LEVEL VALUES

Application At Test Connection At Tailpipe
1.8L 2-.8 0-.4
2.0L 1-3 0-.4
scientia non olet · About LEMON Manuals