LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> Vibe GT, Standard >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Child Restraint Tether Anchor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Child Seat Anchor Bracket & Bolt
    GM2023609Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the child seat anchor bracket (2) to the vehicle. Secure the bracket with the bolt (1).

    Tighten:  Tighten the child seat anchor bracket bolt to 20 N.m (14 lb ft).

  2. Install the rear access panel.
scientia non olet · About LEMON Manuals