LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> Vibe GT, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System And Remote Functions >> Repair Instructions >> Remote Control Door Lock Receiver Replacement >> Removal Procedure

Removal Procedure

    CAUTION: Refer to Battery Disconnect Warning .
  1. Disconnect the negative battery cable.
  2. Remove the right upper quarter panel trim. Refer to Quarter Upper Trim Panel Replacement .
    3. Fig 1: Remote Control Door Lock Receiver, Electrical Connector & Bolt
    GM860850Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the remote control door lock receiver electrical connector (2).
  4. Remove the bolt (3) from the remote control door lock receiver (1).
  5. Remove the remote control door lock receiver (1) from the vehicle.
    6. Fig 2: Remote Control Door Lock Receiver & Mounting Bracket
    GM860853Courtesy of GENERAL MOTORS CORP.
  6. Using a flat-bladed tool, remove the mounting bracket (1) from the receiver (2), if necessary.
scientia non olet · About LEMON Manuals