LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> Vibe GT, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System & Fuel System - 2.4L (Lax) - Repair Instructions >> Repair Instructions >> Engine Coolant Temperature Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the engine cover. Refer to Engine Cover Replacement
  2. Drain the engine coolant. Refer to Cooling System Draining and Filling
  3. Remove the air cleaner cap with hose.
  4. Remove the air cleaner case.
    5. Fig 1: Exploded View Of Engine Coolant Temperature Sensor Connector
    GM2016551Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the engine coolant temperature sensor connector (1).
    6. Fig 2: Exploded View Of Engine Coolant Temperature Sensor & Gasket
    GM2016558Courtesy of GENERAL MOTORS CORP.
  6. Remove the engine coolant temperature sensor (1) and gasket (2).
scientia non olet · About LEMON Manuals