Removal Procedure

WARNING: This page is about a different car, the 2009 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of I/P Accessory Center Trim Plate, Radio & Fasteners

Courtesy of GENERAL MOTORS CORP.

Remove the IP accessory center trim plate. Refer to Instrument Panel Center Trim Panel Replacement .
Remove the 4 bolts which secure the radio.
Pull the radio from the instrument panel.
Disconnect the following from the radio:
- The electrical connector
- The antenna lead

Fig 2: Identifying Right Side Bracket Screws

Courtesy of GENERAL MOTORS CORP.

Remove the four screws and the right side bracket.

Fig 3: Identifying Left Side Bracket Screws

Courtesy of GENERAL MOTORS CORP.

Remove the four screws and the left side bracket.