LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> Vibe Base, 1.8 8, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System & Fuel System - 1.8L (Lay) - Repair Instructions >> Repair Instructions >> Fuel Pressure Regulator Replacement >> Removal Procedure

Removal Procedure

  1. Remove the fuel pump. Refer to Fuel Pump and Fuel Filter Assembly Replacement .
    2. Fig 1: View Of Fuel Pressure Regulator Assembly
    GM2016688Courtesy of GENERAL MOTORS CORP.
    NOTE: Slowly pull out the fuel pressure regulator assembly because the O-ring is firmly installed between the regulator and the fuel filter.
  2. Using a screwdriver with its tip wrapped in protective tape, remove the fuel pressure regulator assembly (1).
    3. Fig 2: View Of O-Rings & Pressure Regulator Assembly
    GM2016690Courtesy of GENERAL MOTORS CORP.
  3. Remove the 2 O-rings (1) from the pressure regulator assembly.
scientia non olet · About LEMON Manuals