LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> Vibe Base, 1.8 8, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System & Fuel System - 1.8L (Lay) - Repair Instructions >> Repair Instructions >> Camshaft Position Sensor Replacement - Intake >> Removal Procedure

Removal Procedure

  1. Remove the engine cover. Refer to Engine Cover Replacement .
    2. Fig 1: Locating Camshaft Position Sensor Connector
    GM2016629Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the camshaft position sensor connector (1).
    3. Fig 2: View Of Camshaft Position Sensor & Bolt
    GM2016630Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolt and the camshaft position sensor (1).
scientia non olet · About LEMON Manuals