LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> Vibe Base, 1.8 8, Standard >> Repair and Diagnosis >> Brakes >> Antilock Brake System With Traction Control System & Stability Control System >> Repair Instructions >> Rear Wheel Speed Sensor Replacement (FWD) >> Removal Procedure

Removal Procedure

    Fig 1: Speed Sensor Components
    GM829894Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector (6) from the wheel speed sensor.
  2. Remove the rear axle hub and bearing assembly. Refer to Rear Wheel Bearing and Hub Replacement (All Wheel Drive) or Rear Wheel Bearing and Hub Replacement (GT) or Rear Wheel Bearing and Hub Replacement (Except All Wheel Drive and GT) .
    3. Fig 2: Removing Wheel Speed Sensor From Axle Hub
    GM840299Courtesy of GENERAL MOTORS CORP.
  3. Remove the wheel speed sensor from the rear axle hub.
scientia non olet · About LEMON Manuals