LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> Solstice Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.4L - DTC P0351 To DTC P2544 >> DTC P0442 >> Circuit/System Testing

Circuit/System Testing

IMPORTANT:
  • Larger volume fuel tanks and/or those with lower fuel levels may require several minutes for the floating indicator to stabilize.
  • Refer to J 41413-200  (J 41413-100) operation manual for detailed instructions in Evaporative Emission System Diagnosis .
  1. Disconnect the purge tube at the quick connector on the EVAP canister side of the purge solenoid valve and install the CH-48096  . Connect the J 41413-200  (J 41413-100) to the CH-48096  .
  2. Use a scan tool to seal the system.
  3. Use the flow meter on the J 41413-200  (J 41413-100) calibrated to 0.51 mm (0.020 in) to determine that there is no leak in the EVAP system.
    • If a leak is detected, use the J 41413-200  (J 41413-100) to apply smoke to the EVAP system at the service port or the filler neck until the leak is located.
scientia non olet · About LEMON Manuals