LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> G6 Base, 2D Coupe >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Repair Instructions >> Steering Gear Boot Replacement >> Removal Procedure

Removal Procedure

  1. Remove the rack and pinion outer tie rod end. Refer to Steering Linkage Outer Tie Rod Replacement .
    2. IMPORTANT: Mark the location of the steering gear inner tie rod nut before removing it from the steering gear inner tie rod.
  2. Remove the steering gear inner tie rod nut and discard it.
  3. Remove the outer steering gear boot clamp.
  4. Remove the inner steering gear boot clamp and discard it.
    5. Fig 1: View Of Steering Gear Boot
    GM854991Courtesy of GENERAL MOTORS CORP.
  5. Disengage and remove the steering gear boot from the steering gear.
  6. Inspect the sealing surfaces and threaded shaft portion of the steering gear and the steering gear inner tie rod. The surfaces must be clean and free of any debris.
scientia non olet · About LEMON Manuals