LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> G6 Base, 2D Coupe >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Diagnostic Information and Procedures >> DTC C0897 >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, disconnect the X2 harness connector at the PSCM.
  2. Ignition ON, verify that a test lamp illuminates between the ignition circuit terminal 8 and ground.
    • If the test lamp does not illuminate, test the ignition circuit for a short to ground or an open/high resistance.
  3. If all circuits test normal, replace the PSCM.
scientia non olet · About LEMON Manuals