LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> G6 Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Control System & Fuel System - 3.5L - Repair Instructions) >> Repair Instructions >> Spark Plug Wire Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Spark Plug Wires To Ignition Coils
    GM1299209Courtesy of GENERAL MOTORS CORP.
  1. Install the spark plug wires (1-6) to the engine.
  2. Install the spark plug wires to the ignition coils.
    3. Fig 2: Engine Right Side Spark Plug Wires
    GM1299397Courtesy of GENERAL MOTORS CORP.
  3. Install the spark plug wires (1, 3, and 5) to the engine right side spark plugs.
  4. Install the spark plug wires to the retaining clip.
    5. Fig 3: Engine Left Side Spark Plug Wires
    GM1299208Courtesy of GENERAL MOTORS CORP.
  5. Install the spark plug wires (2, 4, and 6) to the engine left side spark plugs.
  6. Install the spark plug wires to the retaining clips.
  7. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .
scientia non olet · About LEMON Manuals