LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> G6 Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Control System & Fuel System - 3.5L - Repair Instructions) >> Repair Instructions >> Fuel Line Replacement - Engine >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (Without CH 48027) .
  3. Disconnect the engine fuel feed pipe from the chassis fuel flex hose. Refer to Metal Collar Quick Connect Fitting Service .
    4. Fig 1: Fuel Feed Pipe
    GM1239037Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the engine fuel feed pipe from the Fuel Rail. Refer to Metal Collar Quick Connect Fitting Service .
  5. Remove the two fuel feed pipe fasteners.
  6. Remove the engine fuel feed pipe.
scientia non olet · About LEMON Manuals