LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> G6 Base, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Control System & Fuel System - 3.6L - Repair Instructions) >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Fuel Tank Module Components
    GM1796305Courtesy of GENERAL MOTORS CORP.
  1. Connect the fuel level sensor electrical connector to the pump module electrical connector.
  2. Align the tab opening on the rear of the fuel level senor with the module alignment feature (3).
  3. Press the tab (1) on the sensor out away from the sensor securing the sensor to the module.
  4. Install the fuel level sensor wiring harness to the clip (2) on the module.
  5. Install the fuel tank module assembly. Refer to Fuel Tank Module Replacement .
scientia non olet · About LEMON Manuals