LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> G6 Base, 2D Coupe >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Engine Control System & Fuel System - 2.4L - Repair Instructions >> Repair Instructions >> Throttle Body Assembly Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Throttle Body
    GM1810824Courtesy of GENERAL MOTORS CORP.
  1. Install the throttle body.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the throttle body bolts and tighten to 10 N.m (89 lb in).
    3. Fig 2: Electronic Throttle Control (ETC) & Harness Electrical Connector
    GM1889789Courtesy of GENERAL MOTORS CORP.
  3. Connect the engine wiring harness electrical connector (2) to the ETC (1).
  4. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  5. Perform the Throttle Learn procedure. Refer to Throttle/Idle Learn .
scientia non olet · About LEMON Manuals