LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> G6 Base, 2D Coupe >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System & Fuel System - 2.4L - Repair Instructions >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: MAP Sensor
    GM1581050Courtesy of GENERAL MOTORS CORP.
  1. Install the MAP sensor with the port seal into the intake manifold.
  2. Connect the MAP sensor electrical connector.
  3. Install the throttle body. Refer to Throttle Body Assembly Replacement .
scientia non olet · About LEMON Manuals