LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> G6 Base, 2D Coupe >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Battery Current Sensor
    GM1891579Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure the battery current sensor is installed in the correct direction and location on the negative battery cable.
  1. Install the battery current sensor (1) by passing the ground ends of the negative battery cable through the sensor.
  2. Measure from the same end as earlier, and slide the current sensor to that measurement on the negative battery cable.
  3. Install the battery negative cable. Refer to Battery Negative Cable Replacement (LE5 or LE9)  or Battery Negative Cable Replacement (LY7,LZ4,LZ9,LZE) .
scientia non olet · About LEMON Manuals