LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> G6 Base, 2D Coupe >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Immobilizer System >> Repair Instructions >> Theft Deterrent Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Theft Deterrent Control Module
    GM1207719Courtesy of GENERAL MOTORS CORP.
  1. Install the theft deterrent control module.
    2. CAUTION: Refer to Fastener Caution .
  2. Tighten the theft deterrent control module screws.

    Tighten:  Tighten the screws to 5 N.m (44 lb in).

  3. Install the ignition switch. Refer to Ignition and Start Switch Replacement .
  4. Program the theft deterrent control module after replacement. Refer to Control Module References .
scientia non olet · About LEMON Manuals